Category Archives: News & Events

RunnTech Friction Hold & Mechanical-interlock Joystick for Underground Mine Hoist

Product configuration: RT200-MS-1-P2(10K0-01(1)-HD7-M1

• RT200: RunnTech 200 series single axis joystick controller;
• MS: friction hold with mechanical zero interlock;
• P2: simple one direction output;
• 10K: 10K ohm precision potentiometer;
• HD7: RunnTech joystick grip with waterproof push button;
• M1: mounting dimension 56x56mm, central hole: 63mm.

RunnTech Tiller Head Steering Handle for Pedestrian Truck or Cleaning Machinery

Product configuration: H100-G-L-T

• H100: RunnTech H100 series pallet truck control handle (tiller head);
• G: turtle speed button;
• L: horm button;
• T: speed controller (throttle);

RunnTech 2-Axis Hall DC5V Spring-return Joystick for Measurement or Medical Devices

Product configuration: RT600-T-2-02-HV1-HD12-BT1

• RT600: RunnTech RT600 series hall miniature joystick controller;
• T: spring return device (automatically return to center);
• 2: 2 axis control;
• 02: 4 directions cross limit plate movement;
• HV1: input: DC 5V, output: DC 0V~2.5V~5V (rail to rail);
• HD12: RunnTech joystick grip handle model;
• BT1: 1 momentary thumb push buttons;

RunnTech F200 Series Accelerator Foot Pedal for Electronic Throttle Control Systems

• Hall sensor;
• 5-48V wide output, 0-5V, 0-10V modular control;
• Pedal Force: Initial Load 9N min, Full Throttle 33N max;
• F200 Series Accelerator Foot Pedal is mainly used in hydraulic proportional control and electronic throttle control systems (can replace ComeSys: FZ3-122-131 for Curtis controller);

RunnTech Hall Friction Clutch Movement Joystick for Proportional Hydraulic Systems

Product configuration: RT100-M-1-HV2-02(89)-HD10b4-BT4②③④⑤B-M7

• M: friction hold operation;
• 1: single axis, 2 directions movement control;
• HV2: input: 5V, output: 0.5…2.5…4.5V (Hall);
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HD10b4: RunnTech HD10b4 grip with deadman button;
• BT4②③④⑤B: 4 self-resetting push buttons;
• M7: mounting dimension 85x85mm, central hole: 80x80mm;

RunnTech 100 Series DC5V Joystick with Hall Effect Sensor and 1 Momentary Push Button

Product configuration: RT01-T-3-HV2-02(89)-HD7-BT1R-M4

• RT01: RunnTech 01 series joy Stick controller;
• T: spring return to center;
• 3: dual axis, full direction free movement;
• HV2: DC5V, output: 0.5V …2.5 …4.5V;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HDD7-BT1R: grip with 1 momentary push button;
• M4: mounting dimension: 64x64mm, central hole: 83mm.

RunnTech Dual Axis Dual 10V Output with 2 Momentary Push Buttons Joy Stick Lever

Product configuration: RT01-T-3-V2(10K)-02(89)-HD10b2-BT2③G②R-M4

• RT01: RunnTech 01 series joy Stick controller;
• T: spring return to center;
• 3: dual axis, full direction free movement;
• V2: DC24V, output: +10V…0…+10V;
• 10K: 10K ohm precision potentiometer;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• HD10b2: grip with deadman trigger & 2 push button;
• M4: mounting dimension: 64x64mm, central hole: 83mm.

RunnTech Single-axis Hall Effect Friction Clutch Operation Joystick Lever for Mining Hoist

Product configuration: RT100-M-1-HV2-02(89)-HD1-BT1R-M1

• RT100: RunnTech 100 series industry joystick controller;
• M: friction clutch operation;
• 1: single axis movement operation;
• HV2: input: DC5V, output: 0.5…2.5…4.5V;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• BT1R: one red momentary thumb push button;
• M1: mounting dimension 56x56mm, central hole: 63mm.

RunnTech RT300 Spring-return to Center 4 Steps Crane, Steel Mills or Mining Joystick

Product configuration: RT300-T-3-L-4(1)-HD39-M5

• RT300: RunnTech RT300 series crane joystick (master controller);
• T: spring-return to center operation;
• 3: 2 axis, free movement;
• L:switch assembled horizontal;
• 4(1): 4 steps each direction, (1): closed position;
• HD39: RunnTech joystick handle type;
• M5: mounting dimension: 85x85mm, central hole: 78mm.

RunnTech 2-axis, 0 to 5V Output Joystick Lever with 2 Push Buttons for Flight Simulator

Product configuration:RT01-T-2-V6(10K)-02(89)-HD10b2-BT2③R②G-M4

• RT01: RunnTech 01 series joystick controller;
• T: spring return device (automatically return to center);
• 2: dual axis joystick, cross direction movement;
• V6: input: 24VDC, output: 0…+5VDC;
• 02: 2 normally open contacts in each axis;
• 89: contacts @ -32° to -3° or +3° to +32°;
• H10b2: RunnTech joystick grip with deadman button;
• BT2③R②G: 2 self-resetting push button;
• M4: mounting dimension 64x64mm, central hole: 84mm;